Guide
Scrubber-dryer or sweeper? How to choose
A sweeper collects dry, coarse dirt; a scrubber-dryer removes stuck-on dirt and leaves the floor dry. Here is how to choose – and when a combination machine is worth it.
In short
- A sweeper collects dust, sand, gravel, packaging waste and leaves. It works dry, fast, and outdoors too.
- A scrubber-dryer applies solution, scrubs the floor with brushes or pads and vacuums up the dirty water, leaving the floor dry. It removes oil, stains and stuck-on dirt.
- A sweeper-scrubber does both in a single pass – useful in large, dirty halls.
When to choose a sweeper
- The dirt is mainly dry and coarse: warehouses, halls, car parks, yards.
- You also work outdoors or on asphalt.
- You want to reduce dirt before scrubbing – a swept floor is scrubbed faster and uses less water.
When to choose a scrubber-dryer
- The floor has stains, tyre marks, oil or grease.
- Hygiene matters – shops, hospitals, the food industry.
- You want the floor dry immediately and usable without interruption.
When you need both or a combination machine
In large halls and warehouses with mixed dirt, the most efficient solution is a combination machine (for example the Tennant M17) or a sweeper plus a scrubber-dryer. A combination machine saves an operator and a pass; two separate machines give flexibility when areas differ a lot.
Quick table
| Situation | Recommendation |
|---|---|
| Warehouse with dust and packaging waste | Sweeper (e.g. S780) |
| Shop, tiles, stains | Scrubber-dryer (e.g. T7) |
| Large hall, mixed dirt | Sweeper-scrubber (e.g. M17) |
| Car park, yard | Ride-on sweeper |



